◇Use

● This instrument is for PC combining announcement and it is established at each guardroom or janitor’s office. It is a remote control amp enables storewide, or each building/stair/floor announcement using key-board through which it is possible to freely select wherever users want by remote controlling the main announcement equipment.
(PC Broadcast and RX/TX-SYSTEM Combination)

◇Function

● One-touch selection of building and uses LED lamp switch.

● In time of a fire, the firing place is shown at LCD-display and warning sound.

● Prevents audio confusion by indicating related building by flickering when other remote makes announcement.

● Prevents selecting same building at the same time with another remote. (However, in time of storewide announcement, it is selected depending on priority.)

● Indicates every kind of information at LCD-display.

● It is possible to control volume through attached audio level meter.

● When announcement begins and ends, produces delightful chime automatically.

◇Specification

● Used CPU: ONE-CHIP MICRO PROCESSOR

● SYSTEM CLOCK : 4.0MHZ

● Communication Method: Asynchronous SIGNAL / Full Duplex

● RESISTOR (SRAM): 192x8

● EPROM: 4K BYTE

● EEPROM: 8K BIT

● DISPLAY: LCD 16x2-LINE

● Communication PORT: RS485 Method

● AUDIO OUT: +4dB ( 600 Ω BALANCE )

● AUTO CHIME: Start / do, mi, sol, do
                 Finish/ do, sol, mi, do
● Memory Shortcut: 20 buildings (Expandable up to 40 wards)

● Power Supply: DC24V (DC ADAPTOR)

● MATERIAL: CHASSIS - STEEL 1.2t

 ● SIZE: 280(W) *60(H) *210(D)